The equipment or the circuit which is protected from the sudden and spontaneous strokes of the lightening with the help of a protection device is referred to as the lightning arrester. The strokes of lightening about which we are talking are nothing but the high transient voltage and sparks of currents which are caused due to lightening. With the help of lightning arresters, the power stations are defended by forwarding the high voltage surges in the direction of the ground. In addition to this, these power equipments and the over headlines can be protected by utilizing the ground wires or the earth wires from the direct strikes of lightning.

The LAMCO lightning arrester supplier in Kolkata is widely known for providing top-notch quality lightning arresters. The types of lightning arresters provided are:

• Horn Gap Arresters: The horn gap arrester has two metal rods in the shape of horn. The arrangement of these metal rods can be completed with air gap. The distance in between the metal rods can be increased due to the gap. Also, these rods are situated on the ceramic insulators. The gap in between the horns can be adjusted along the usual supply of the voltage which isn’t enough to cause the arc.
• Multi Gap Arresters: The multi gap arresters are designed and developed in a manner of sequential of the metal cylinders which are insulated through the air gaps. In the sequence of the metal cylinders, the first one of connected to the electrical line and the second and remaining ones are connected to the ground by series resistance. The gaps that are situated in between in the cylinders are due to the shunt resistance that grabs a surge in case when there’s surplus of the voltage.
• Valve-Type Arresters: The Valve type arresters are suitable for the electrical systems which are highly powered. These arresters consist of the two vital parts which acts as a sequence when the spark gaps go off of the non-linear resistor discs. The working of this arrester can be conducted only when there is an extreme voltage causes a spark gap to the stroke and the resisters hold the voltage within the ground.
• Pellet-Type Arresters: The pallet type arresters can be conducted with the glass tubes which are filled with the lead pellets. These are finished from the inside of the lead peroxide which is coated along the lead oxide.

If you are in need of any of the lightning arresters, then you can contact the LAMCO lightning arrester supplier in Kolkata.